RM450- The RM450 has a milling depth of 150mm and is designed for milling in larger areas and depths that large contractors require. - The tilt cylinder adds another dimension to the Schibeci RM450. This system allows you to cut to depths on either side of the machine (the same as the smaller RM milling machines) or set a cross slope angle upto 15% for rebates and angle cuts as required. - The side shift allows for asphalt removal against kerbs and structures. This RM450 is ideal for high speed edge planing and shallow cuts. - The RM450 is designed primarily for the Roadworks and Construction industry. - It's compact design makes it perfect for minor rectification works. - It's solid framework and fluid dynamic design makes the RM range stable in the cut. - The two levelling rams on the RM give the operator a high degree of accuracy in cutting depth and cross slope control. - All controllers for the RM are easily mounted onto any standard High Flow Skid Steer and utilise the machines existing hydraulics. - Dust suppression system comes standard with the RM range. - The RM range is an excellent solution for Councils, Contractors, Maintenance Teams and Hire Companies. Performance Guidelines • Cuts Asphalt up to 150mm (6 inches) deep (per pass) • Excellent milling solution for asphalting contractors and councils • For use in minor road rectification works • Suits High flow skid steers and excavatorsThe RM450 is designed to be used with High Flow Skid Steers, Excavators and Backhoes.